JSC “NC “Kazakhstan Engineering” presented its own exhibition stand, which is located in the International Exhibition Center “EXPO” (Stand – E1). More than 40 exhibits are presented at the corporate stand of the Company - these are the products of Zenit JSC, R&D Center Kazakhstan Engineering LLP, ZiK JSC, KAI LLP, Semey Engineering JSC, Tynys JSC, 811 Automobile Repair Plant JSC ”, Eurocopter Kazakhstan Engineering LLP, Research Institute Gidropribor JSC, SMZ JSC, PZTM JSC.
R&D Center Kazakhstan Engineering LLP presented samples of its own developments: Shagala-M UAV, UAV - an aerial target with a turbojet engine, as well as a robotic ground complex based on a caterpillar platform.
The Chagala-M unmanned aerial system is designed for reconnaissance, reconnaissance, surveillance and target designation. The drone can be used at any time of the day all year round in various climatic and geographical conditions, it is possible to use it as a repeater for communications and control. Subject to modification, this UAV can be used in various areas of the country's economic activity.
Photo: Chagala-M unmanned aerial system
Aerial target with a turbojet engine was developed for the needs of the Ministry of Defense in order to meet the combat training of military and facility air defense forces by simulating a wide range of various modern high-speed air attack weapons such as cruise missiles, ballistic missiles and aircraft. The UAV can be modified to be used as a loitering projectile. The maximum flight speed reaches 500 km / h, the wingspan is 2.6 m, the flight duration is 45 minutes.
Photo: UAV - aerial target with a turbojet engine
Another development of R&D Center Kazakhstan Engineering LLP is a robotic ground complex based on a tracked platform designed to solve a wide range of tasks on the battlefield: reconnaissance, detection and destruction of stationary and mobile targets, fire support for units, protection of convoys, detection and destruction enemy forces, towing broken vehicles, perimeter defense, security, rescue, border patrol, riot control and munitions disposal. The ground platform can move in any weather on very steep slopes and rough terrain. Subject to the modification of the complex, the remote-controlled module can be replaced with a fire monitor.
Photo: robotic ground complex based on a caterpillar platform.
Petropavlovsk JSC "Plant im. CM. Kirov” showed products of its own production: robotic equipment for fire fighting, rugged tablets and laptops, computer equipment and a VHF/UHF radio station MEDEU-KD.
"MEDEU-KD" is a portable VHF radio station for communication in the grassroots command and control of the armed forces. It encrypts speech and data using the AES-256 block algorithm, supports TCP / IP protocols at the channel, network and transport levels. R/S "MEDEU-KD" is a proprietary ZIK with performance characteristics superior to the Israeli counterpart PNR500, which is in service with the Armed Forces of the Republic of Kazakhstan, but at the same time inferior in price. Military trials are scheduled to begin in 2023.
Photo: VHF radio station VHF / UHF band "MEDEU-KD".
JSC "Ural Plant" Zenith "presented models of ships of its own production: an auxiliary (multifunctional) vessel, a missile and artillery ship of project 250 Bars-MO, a speedboat of project FC-19 up to 27 tons, a small patrol ship of Aibar project , a boat for special forces units.
JSC Research Institute Gidropribor, Uralsk, is the developer of the Kazhymukan icebreaking and tugboat, the SHAFALA high-speed patrol boat, a small ice sea buoy (BMML), as well as a mobile station for providing diving descents of special forces units.
Photo: products of JSC Ural Plant Zenit and JSC Research Institute Gidropribor
The Kokshetau plant of Tynys JSC» boasted of its civilian products, including medical equipment, an electric wheelchair for adults and children, fire extinguishing equipment and components for the oil and gas and railway industries. Of particular interest is the friction wedge, which is an integral part of the wedge vibration damper of the freight car bogie 18-9996 and provides vibration damping of the car. Such a wedge is suitable for operation throughout the 1,520 mm gauge railway network.
Photo: friction wedge produced by Tynys JSC
Tynys JSC also presented the Kokshetau-4P ventilator - a compact, silent, autonomous device designed for artificial ventilation of the lungs with an oxygen-air mixture and oxygen inhalation in ambulances, directly at the scene and in the field, and also clinical departments of surgery, resuscitation, intensive care wards.
Photo: artificial lung ventilation apparatus "Kokshetau-4P"
Eurocopter Kazakhstan Engineering LLP exhibited models of H125, H130, H145, H145M helicopters. JSC "Semey Engineering" ,specializing in the overhaul of armored vehicles, presented models of its products at the exhibition: Tank T-72, BTR-82A, SBM Tiger, as well as a model of conversion wheeled vehicles (8x8) based on the BTR-70. Semey Engineering JSC is the only enterprise in Central Asia that carries out overhaul and modernization of Soviet armored vehicles at such a high level.
Photo: stand of Semey Engineering JSC
JSC "Semipalatinsk Machine-Building Plant" also presented models of its own products: caterpillar transport tractor, three-axle semi-trailer MAZ-997700, as well as manhole covers.
The Kazakh-Turkish plant LLP "Kazakhstan Aselsan Engeneering"is a manufacturer of electronic and optical products: optical sights and night vision devices, printed circuit boards and various electronics. For example, the 3700 series portable radio station is the most technologically advanced of a number of analogues; at the moment, technology is being transferred for its production.
Photo: products of Kazakhstan Aselsan Engineering LLP
Petropavlovsk Heavy Machine Building Plant JSCis the only manufacturer of lifting units in Kazakhstan with a lifting capacity of 40 to 125 tons. The plant presented models of the APRS-40 well workover lifting unit, the PAP80/100 lifting unit, the PTP-40 tractor hoist, the AS-204 special vehicle with a 1600/100 steam unit, as well as various equipment for the oil and gas, oil refining and railway sectors.
The street exposition on the site in front of the IEC presents conversion wheeled vehicles (8x8) based on the BTR-70, TRM manufactured by Semey Engineering JSC, as well as the equipment of the partners of JSC NC Kazakhstan Engineering - Nomad Tech Engineering together with Paramount Engineering - armored vehicle "Alan -2"
The stand of JSC “NC “Kazakhstan Engineering” was visited by Prime Minister A. Smailov, Minister of Industry and Infrastructure Development K. Uskenbaev.
Photo: Minister of Industry and Infrastructure Development K.Uskenbaev
and Chairman of the Board of JSC “NC “Kazakhstan Engineering” T. Abdrakhmanov.
Kazakhstan Machinery Fair is the leading industry exhibition in Kazakhstan and the premier meeting place for machine building professionals, government sector representatives and various business communities. The exhibition is held within the framework of the Forum of Machine Builders of Kazakhstan. More than 250 companies from Kazakhstan and abroad presented new equipment and technologies for the engineering industry: machine tools, welding equipment, robotics, additive technologies, etc.